Member of the Radiant Panel Association

Click to verify BBB accreditation and to see a BBB report.

The shipping warehouse and offices of Hannel Enterprises Inc. are located in Spokane Washington. We ship every weekday to any place in the world. Shipments within the lower 48 United States are always shipped freight paid on complete radiant packages.

Sizing and Pricing Radiant heating Packages

Our radiant packages are complete with everything you need but the thermostat wire and venting pipe.

We Guarantee It! Anything we leave out we will furnish for free.

Rough Pricing Guidelines

In our experience, customers who have a radiant floor heating system installed by a local professional will spend $8.00 to $12.00 per square foot. We’re able to offer our complete packages as low as $3.00 per sq. ft. (That does include a heat source.)

Some people believe they can save money by designing their own systems. We take calls on a weekly basis from folks who've gotten themselves in trouble that way. Invariably, we find that ultimately, they would have saved valuable time and money by ordering one of our complete in-floor heating systems. Although we do occasionally sell some components, we can only guarantee our complete radiant floor heating packages. Service after the sale, we are the best, ask our customers.

Basic packages include:

  • Either a 100,000 BTU Polaris Combo Heater OR
  • a 125,000 BTU Bock Combo Heater, OR
  • a 30,000 to 100,000 BTU modulating Triangle Tube boiler
  • 1/2" PEX tubing, Full house anti-scald valve, T&P relief valve, Brass Zone manifolds, Zone actuators, High Head Bronze (open system) or Cast Iron (closed system) circulating pump, Brass fittings, PEX adapters, Extra PEX repair couplings, Tubing cutter, Brass Manifold and Control Box mounted on 3/4" Melamine, pressure and electrical tested.
  • Call for ElectroBoiler package pricing

Complete Instructions and delivery included in continental U.S.

Tubing layout included with complete packages

Polaris

Polaris

Bock

Bock

Triangle Tube

Trinity

ElectroBoiler

ElectroBoiler



Follow these simple steps to find the size and cost for your application:

  1. Use the chart below to find the amount of tubing you will need.
  2. Choose the type of fuel you will use.
  3. Choose the type of boiler you will use.
  4. Add the few extra's needed to install your package.

Step One:

TYPE AREA IN SQUARE FEET
Quick Calc
Multiply Sq. Ft. by .75 for Slabs 1.0 for Lumber Overlay 1.5 for Staple-Up
Add 500' for vaulted areas or areas of high heat-loss.
TUBING AMOUNT
BASE    
MAIN    
UPPER    
OTHER    
GARAGE    
OTHER    
Round tubing total up to nearest 500´
Some older homes may need more tubing. SIP's, ICF's and well insulated homes may need less.

Step Two: Choose your fuel.

  1. Natural Gas: This is your best choice if it is available. It will cost less per month, is very clean, and vents through the wall.
  2. Oil: This is your next best choice if Nat Gas is not available. It will cost at about 40% less than propane and 60% less than electric. It will need a service call once a year. It does need a chimney.
  3. Propane: Propane is typically more expensive than natural gas or oil, but is often the best solution where those fuels are not available or when propane is already on site for other reasons
  4. Electricity: Electricity is available almost everywhere and may now be the most cost effective alternative for some geographies and situations.
  5. Wood: We are not a direct supplier of wood boilers. Greenwood Technologies offers an excellent wood-fired boiler through their website www.greenwoodtechnologies.com. We can provide the rest of your Radiant package.

Step Three: Use the amount of tubing on the left, go across to the heater of your choice

  AMOUNT OF TUBING COST w/BOCK 80+% OIL (125,00 BTU) OPEN SYSTEM COST w/BOCK 80+% Natural Gas or Propane (125,000 BTU) OPEN SYSTEM COST w/POLARIS 95+% Natural Gas or Propane (100,000 BTU) OPEN SYSTEM COST w/TRIANGLE TUBE 93+% Natural Gas or Propane (30k to 100k BTU's) CLOSED SYSTEM
  1000 $4,550.00 $5,150.00 $6,050.00 $6,250.00
  1500 $4,900.00 $5,500.00 $6,400.00 $6,600.00
  2000 $5,250.00 $5,850.00 $6,750.00 $6,950.00
  2500 $5,600.00 $6,200.00 $7,100.00 $7,300.00
  3000 $5,950.00 $6,550.00 $7,450.00 $7,650.00
  3500 $6,300.00 $6,900.00 $7,800.00 $8,000.00
* 4000 $6,650.00 $7,250.00 $8,150.00 $8,350.00
* 4500 $7,000.00 $7,600.00 $8,500.00 $8,700.00
* 5000 $7,350.00 $7,950.00 $8,850.00 $9,050.00
* 5500 $7,800.00 $8,400.00 $9,300.00 $9,500.00
* 6000 $8,150.00 $8,750.00 $9,750.00 $9,850.00
* 6500 $8,500.00 $9,100.00 $10,000.00 $10,200.00
* 7000 $8,850.00 $9,450.00 $10,350.00 $10,550.00
* 7500 $9,300.00 $9,900.00 $10,700.00 $10,900.00
* 8000 $9,650.00 $10,250.00 $11,050.00 $11,250.00
* 8500 $10,000.00 $10,600.00 $11,400.00 $11,600.00
* 9000 $10,450.00 $11,050.00 $11,750.00 $11,950.00
* MAY REQUIRE A HEATER UPGRADE (see below for pricing)

* The prices above are for multiple zone brass manifolds. Where all ports/loops are to be controlled by one thermostat, single zone copper manifolds may be substituted for ~$1000 less.


Step Four: Add recommended extra's to complete Your Radiant Heating package.

Item Cost
Thermostats $45.00
TUBESPOOLER - Tubing dispenser, needed for wood floors. $45.00
Radiant Clip Gun - To attach PEX tubing under wood floors. $45.00
Pneumatic Clip Gun - Air powered for larger jobs. $450.00
Radiant Clips - One every 16" - 18" under wood floors. (100 per box) $12.00
Barbed Foam Staples - One per two feet of tubing. (300 per box) $48.00
Foam Stapler - For use with foam staples. $400.00
Tie Wraps - For slabs, one per every two feet of tubing. (100 per bag) $6.00
Transitional Elbow - 2 Needed per loop, protects tubing where it exits the slab. $2.00
Super-R Radiant Barrier, 500 sq. ft. in 48”, 24” and 16 $300.00
Pressure Test Kit - To pressurize tubing while pouring slab. $45.00
Closed System Kit - For Heating packages with space heating only. $100.00
Automatic Snow Melt Control $250.00
Indirect Kit - Separates domestic hot water from the heating system.(100K BTU) $900.00
 
Heater Upgrades Cost
Bock 40BCS balanced combustion for side wall venting $600.00
Bock 51E $300
$300.00
Bock 51BCS balanced combustion for side wall venting $1050.00
Bock 71E $700.00
Bock 72E $850.00
Polaris 130,000 BTU, 50 gal $600.00
Polaris 199,000 BTU, 50 gal $1300.00
TT Prestige Solo 175,000 BTU $1500.00
TT Prestige Solo 250,000 BTU $2000.00
2” Concentric Vent Kit $110.00
3” Concentric Vent Kit $125.00

In a Closed System the heating water does not intermingle with the domestic water.

In an Indirect System a heat exchanger allows you to use a single heat source while keeping the domestic water separated from the heating water.

In an Open System the heating water and domestic water mix freely.

Credit Cards Accepted

ORDER TODAY 888-298-6036


Your sales and support technician is trained to help you with an accurate sizing assessment for your project. Give us a call, we can walk you through our process, answer your questions and work up the appropriate solution for your project..

We can ship the tubing and needed accessories to start the installation the same day as ordered if ordered before 10:00 am pacific time (additional shipping charges may apply)

FedEx shipping is typically 5 business days or less in the lower 48

Rush Orders Are Extra - Please do not wait until the last minute.

SHIPPING IS INCLUDED WITH COMPLETE PACKAGES

WE SHIP TO CANADA

  • Canadian shipments are subject to duties, taxes, brokerage fees and additional shipping charges.
  • We can take care of all the paperwork via our FedEx Trade Networks account.
  • Some product warranties do not apply in Canada, ask your sales person for clarification.

Radiant Direct™ Reserves the right to change the price or to improve the products at any time.

Shipping Policy
Shipping Policy

It is the goal of Radiant Direct to exceed the customers expectations in products and services. Radiant Direct must be notified within 72 hours of any damages or claims will not be honored.

Return Policy

If you are not satisfied with your purchase you may return it for a refund within 30 business days of receipt. To initiate a return, call 888-298-6036 expressing your desire to return the product. It is the ultimate responsibility of the customer to ensure that the unit is shipped back to us in sellable condition. Upon receipt of the item in the original packaging, and in new, unused condition Radiant Direct will issue a refund for the purchase amount less original shipping charges and a 20% re-stocking fee.

Copyright © 2007 by Hannel Enterprises Inc.™ All Rights Reserved | Website by FT11 Interactive