Introducing Solutions for Heating Small Areas
For several years, we've been offering complete radiant heating packages to homeowners, builders and the average do-it-yourselfer. Typically, we´re able to produce a customized solution that works for projects ranging in size from 1,500 square feet up to 10,000 square feet and sometimes even larger. A majority of these projects fall into the 2,500 to 6,000 square foot range. For these, a high-efficiency heat source in an open or indirect system makes a lot of sense. Smaller areas, lower heat loads and lower budgets require a different solution. The solution we have developed is a closed radiant package with lower output heat sources designed specifically to meet this need.
Let's quickly define the three types of radiant systems:
An Open System just indicates that the water in the radiant floor heating system freely mingles with the domestic hot water.
An Indirect System would separate the domestic hot water from the radiant system by way of a heat exchanger kit.
A Closed System would only heat the radiant system and you´d need a separate heat source for domestic hot water.
Our small area packages are offered as closed systems with smaller capacity water heaters. This means you will need an additional water heater for your domestic hot water. One of our sales/support technicians will walk you through our sizing and pricing process to insure the proper solution for your project requirements. The gas-fired packages are designed for projects up to at least 1,500 square feet. The electric water heaters will heat up to 600 square feet. Larger projects will require heater sizing upgrades or alternate heat sources. Of course, the larger the project, the more critical efficiency becomes. Our Bock, Polaris and T-200 packages are available here for projects 1,000 square feet and up, where higher efficiency is a factor.
Pacemaker® Gas Water Heaters
- 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years!
- Guardian System™
- One-of-a-kind air/fuel shut-off device offers double protection
- Maintenance free - no filter to clean
- Standard replacement parts
- Environmentally Friendly Burner
- Low NOx design for low nitrous oxide emissions
- Self-Cleaning
- EverKleen™ patented system fights sediment build-up
- Reduces fuel costs
- Provides more hot water
- Easy to Light
- No matches required Energy Efficient
- More hot water at low operating cost
- Energy Factor is .59
- High Altitude Compliant
- All models are certified for applications up to 6,000 feet above sea level
- Longer Life
- Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust
Plus....
- Brass drain valve and temperature and pressure relief valve are included
- Meets or exceeds National Appliance Energy Conservation Act (NAECA) requirements
Pacemaker®
Energy Miser® Electric Water Heater
- 6-Year Limited Tank and Parts Warranty* With ProtectionPlus™ the 6-Year Limited Tank Warranty Becomes 10 Years!
- EverKleen™ self cleaning device
- Brass drain valve
- Temperature and pressure relief valve included
- Isolated tank design reduces conductive heat loss
- High efficiency resistored heating elements
- Energy Factor is .91
- Anode rod equalizes aggressive water action
- Electric junction box located above heating elements for easy installation
- Over-temperature protector cuts off power in excess temperature situations
- Automatic thermostat keeps water at desired temperature
- Meets or exceeds requirements of the National Appliance Energy Conservation Act (NAECA)
High Efficiency Models Feature:
- High performance and recovery
- Patented R-Foam® insulation
- Compliant with many electric utility incentive programs
These units are designed to meet or exceed ANSI (American National Standards Institute) requirements and have been tested according to D.O.E. test procedures and meet or exceed the energy efficiency requirements of NAECA, ASHRAE standard 90, BOCA Code and all state energy efficiency performance criteria for energy consuming appliances.
See Residential Warranty Information Brochure for complete warranty information.
Follow these simple steps to find the size and cost for your application
- Use the chart below to find the amount of tubing you will need.
- Choose the type of fuel you will use.
- Choose the type of boiler you will use.
- Add the few extra's needed to install your package.
Step One : Get an estimate of the required tubing amount
| TYPE | AREA IN SQUARE FEET | Quick CalcMultiply Sq. Ft. by .75 for Slabs 1.0 for Lumber Overlay 1.5 for Staple-UpAdd 500' for vaulted areas or areas of high heat-loss. |
TUBING AMOUNT | ||
|---|---|---|---|---|---|
| BASE | |||||
| MAIN | |||||
| UPPER | |||||
| OTHER | |||||
| GARAGE | |||||
| OTHER | |||||
| Round tubing total up to nearest 500´ | |||||
| Some older homes may need more tubing. SIP's, ICF's and well insulated homes may need less. | |||||
Step Two: Choose your fuel and heat source.
Electric: Electric heaters should only be used to heat small areas such as a bathroom, kitchen or small addition.
Natural Gas: This is your best choice for radiant floor heat if it is available. It will cost less per month, is very clean, and fuel pricing is generally stable..
Propane: Propane is typically more expensive than natural gas or oil, but is often the best solution where those fuels are not available or when propane is already on site for other reasons..
Basic packages include one of the following Ruud PaceMaker water heaters:
- 4.5 kW 50 gallon Electric (E2)
- 4.5 kW High-Efficiency 50 gallon Electric (E3R (HE))
- 40,000 BTU 40 gallonNatural Gas or Propane (40N or 40LP)
- 50,000 BTU 60 gallonNatural Gas or Propane (50N or 50LP)
- 70,000 BTU 75 gallon - Natural Gas or Propane (70N or 70LP)
1/2" PEX tubing, T&P relief valve, Brass Zone manifolds, Zone actuators, High Head Bronze circulating pump, Brass fittings, PEX adapters, Extra PEX repair couplings, Tubing cutter, Closed System Kit (expansion tank, float vent), Brass Manifold and Control Box mounted on 3/4" Melamine, pressure and electrical tested.
Complete Instructions and delivery included in continental U.S. Tubing layout included with complete packages.
Step Three: Pricing
Use the amount of tubing on the left , go acress to the heater of your choice:
| Electric / High Efficiency | Natural Gas | Propane | ||||||
| Tubing | E2 | E3R (HE) | 40N | 50N | 70N | 40LP | 50LP | 70LP |
|---|---|---|---|---|---|---|---|---|
| 500' | $1,900 | $1,950 | $2,250 | $2,350 | ||||
| 1000' | $2,200 | $2,250 | $2,550 | $2,750 | $2,650 | $2,850 | ||
| 1500' | * | * | $2,850 | $3,050 | $3,250 | $2,950 | $3,150 | $3,350 |
| 2000' | * | * | $3,150 | $3,250 | $3,550 | $3,250 | $3,450 | $3,650 |
| 2500' | * | * | $3,450 | $3,650 | $3,850 | $3,550 | $3,750 | $3,950 |
| 3000' | * | * | $4,150 | $4,250 | ||||
* Indicates the possible need for additional output capacity. Alternate electrical heat sources may be available. Speak to your sales/support technician for other options.
Step Four: Additional Components
| Item | Cost |
|---|---|
| Thermostats | $45.00 |
| TUBESPOOLER - Tubing dispenser, needed for wood floors. | $45.00 |
| Radiant Clip Gun - To attach PEX tubing under wood floors. | $45.00 |
| Pneumatic Clip Gun - Air powered for larger jobs. | $450.00 |
| Radiant Clips - One every 16" - 18" under wood floors. (100 per box) | $12.00 |
| Barbed Foam Staples - One per two feet of tubing. (300 per box) | $48.00 |
| Foam Stapler - For use with foam staples. | $400.00 |
| Tie Wraps - For slabs, one per every two feet of tubing. (100 per bag) | $6.00 |
| Transitional Elbow - 2 Needed per loop, protects tubing where it exits the slab. | $2.00 |
| Super-R Radiant Barrier - 4´ wide x 125´, (500 Square Feet) | $300.00 |
| Pressure Test Kit - To pressurize tubing while pouring slab. | $45.00 |
| High Altitude Gas Heaters (for 6,000´ +) | add $50.00 |
| Higher Output Electrical Heaters | Call for Pricing |
ORDER TODAY 888-298-6036
WE CAN SHIP THE TUBING AND NEEDED ACCESSORIES TO START THE INSTALLATION THE SAME DAY AS ORDERED IF ORDERED BEFORE 10:00 AM PACIFIC TIME (ADDITIONAL SHIPPING CHARGES MAY APPLY) U.P.S. IS NORMALLY FOUR TO FIVE DAYS IN THE LOWER FORTY EIGHT STATES RUSH ORDERS ARE EXTRA - PLEASE DO NOT WAIT UNTIL THE LAST MINUTE
FREE SHIPPING IN THE LOWER 48 STATES ON COMPLETE PACKAGES
Tankit
For those customers who have an existing heat source they would like to tap into, we have developed these kits. The Tankit includes the parts needed to turn your water heater into a heat source for a small radiant heating system. Water heaters are very limited in their capacity and can only heat small areas, they are also very inefficient and not practical for large areas.
Sizing
YOU WILL NEED THIRTY BTU'S PER SQ. FT. OF FLOOR SPACE. MOST WATER HEATERS ARE ABOUT 70% EFFICIENT. MULTIPLY THE INPUT RATING ON YOUR HEATER BY .70 TO FIND ITS CAPACITY. YOU WILL NEED AT LEAST 20,000 BTU'S ADDITIONAL FOR DOMESTIC HOT WATER.
Tankit Packages
| Includes: Brass Circulating Pump, Brass Fittings, PEX Adapters, Relay and Transformer for Pump Control, Thermostat, MR. PEX w/O2 Barrier, Installation Instructions. | |
| TUBING | KIT PRICE |
|---|---|
| 500' | $800.00 |
| 1000' | $1,100.00 |
| 1500' | $1,400.00 |
| 2000' | $1,700.00 |
To make any of these closed systems, add $100.00. Dual thermostat configuration available. Go back up to step 4 to complete your package.
Your sales and support technician is trained to help you with an accurate sizing assessment for your project. Give us a call, we can walk you through our process, answer your questions and work up the appropriate solution for your project in about 15 minutes.
Radiant Direct™ Reserves the right to change the price or to improve the products at any time.
Shipping Policy
It is the goal of Radiant Direct to exceed the customers expectations in products and services. Radiant Direct must be notified within 72 hours of any damages or claims will not be honored.
Return Policy
If you are not satisfied with your purchase you may return it for a refund within 30 business days of receipt. To initiate a return, send an e-mail to returns@radiantdirect.com or call 888-298-6036 expressing your desire to return the product. It is the ultimate responsibility of the customer to ensure that the unit is shipped back to us in sellable condition. Upon receipt of the item in the original packaging, and in new, unused condition Radiant Direct will issue a refund for the purchase amount less original shipping charges and a 20% re-stocking fee.